Nchanga-Cave inMining in Zambia Mining safety 

KCM’s Nchanga cave-in section collapses without any injuries | Zambia

Zambian mining firm Konkola Copper Mines, a subsidiary of UK-based Vedanta Resources, has confirmed the expected cave-in at its Nchanga openpit mine has occurred without any injuries.

In a media statement, the company said 3 million tonnes of material over 370 metres around the epicenter of the failure zone had collapsed, as had been predicted using the firm’s slope montoring systems.
 

The collapse at the mine, which is the second-largest opencast mine in the world, occurred without any threats to the safety of employees or people in communities near the mine area, said KCM. 

The KCM geotechnical team had predicted that the fall of ground on the extreme ends of the unstable zone will continue until all loose ground attain a natural angle of repose. The company commends Chingola residents for their co-operation in implementing safety measures announced by the company thus far.

The failure is unlikely to occur beyond an area marked as a hazard exclusion zone, the company said.

The failure, which occurred around 08:30 hours on July 15, was controlled by planar sliding of the unstable ground above the mine’s Lower Banded Shale level. The sloughing material settled against the north wall and was visibly wet.

There was also visible distortion of the original water pipeline by the moving ground, but no negative impact is expected on the newly installed re-routed water pipeline, used to carry water from the Kafue Pump Station to the KCM Smelter and eventually to Mulonga Water and Sanitation Company for onward community consumption.

Open Pit mining at Nchanga started in 1955, in the main Nchanga Open Pit. Subsequently, nine medium-sized satellite openpits have also been mined.
Share this article on

Related posts

You have successfully subscribed to the newsletter

There was an error while trying to send your request. Please try again.

Copperbelt Katanga Mining will use the information you provide on this form to be in touch with you and to provide updates and marketing.